*
CR4-1
CompactPCI * Accessories
CY-20-SSD25-003	Onboard SATA SSD drive 2.5" for EKF boards 120GB capacity, MLC, 6Gb/s
CY-20-SSD25-004	Onboard SATA SSD drive 2.5" for EKF boards 240GB capacity, MLC
CY-21-SSD25-0256-02	2.5" SATA 256GB (6Gb/s) Solid State Drive (SSD) 3D-TLC, 0-70 degrees Centigrade Power Loss Data protection Industrial quality
CY-21-SSD25-0512-01	2.5" SATA 512GB (6Gb/s) Solid State Drive (SSD) 3D-TLC, 0-70 degrees Centigrade Power Loss Data protection Industrial quality
CY-21-SSD25-1T00-01	2.5" SATA 1TB (6Gb/s) Solid State Drive (SSD) 3D-TLC, 0-70 degrees Centigrade Power Loss Data protection Industrial quality
CY-28-M2-0128-02	M.2 2280 SATA 128GB Solid State Drive (SSD) SATA III, 128GB, 0°C - + 70°C, TLC
CY-28-M2-0128-03	M.2 SATA 6Gbps module, MLC T-BGA Flash, 128GB -40° bis +85°C
CY-28-M2-0256-02	M.2 2280 SATA 256GB Solid State Drive (SSD) SATA III, -40°C - +85°C, TLC
CY-28-M2-0512-03	M.2 2280 SATA 512GB Solid State Drive (SSD) SATA III, 512GB, 0°C - + 70°C, TLC
CY-28-M2-1T00-03	M.2 2280 SATA 1TB Solid State Drive (SSD) SATA III, 1TB, 0°C - + 70°C, TLC
CY-29-M2-0256-02	240GB M.2 SSD, PCIe x 4 Gen3, NVMe, TLC size 2280, 0°C to +70°C
CY-29-M2-0512-01	480GB M.2 SSD, PCIe x 4 Gen3, NVMe, TLC size 2280, 0°C to +70°C
CY-29-M2-1T00-03	960GB M.2 SSD, PCIe x 4 Gen3, NVMe, TLC size 2280, 0°C to +70°C
CY-29-M2-2T00-02	1.92TB M.2 SSD, PCIe x 4 Gen3, NVMe, TLC size 2280, 0°C to +70°C
CY-29-M2-4T00-01	3.84TB M.2 SSD, PCIe x 4 Gen3, NVMe, 3D TLC size 22110, 0°C to +70°C
CY-29-M2-4T00-02	3.84TB M.2 SSD, PCIe x 4 Gen3, NVMe, 3D TLC size 22080, 0°C to +70°C
CY-30-AIR-003	3U/4HP Front Panel w/o opening w shield w grey handle w dummy euroboard to optimize air guide
CY-30-FHBLIND-4HP	3U/4HP Front Panel w/o opening w shield w grey handle
CY-30-FHBLIND-8HP	3U/8HP Front Panel w/o opening w shield w grey handle
CY-30-FPBLIND-2HP	3U/2HP Front Panel without opening w EMC shielding
CY-30-FPBLIND-4HP	3U/4HP Front Panel without opening w EMC shielding
CY-30-FPBLIND-8HP	3U/8HP Front Panel without opening w EMC shielding
CY-40-DDR3-ECC-16384	Memory add-on 16GB (1x16GB) with qualified DDR3 ECC RAM for EKF boards Core i7 Gen.3+ 0...70 degrees Centigrade
CY-40-DDR3-ECC-8192	Memory add-on 8GB (1x8GB) with qualified DDR3 ECC RAM for EKF boards Core i7 Gen.3+ 0...70 degrees Centigrade
CY-40-DDR4-ECC-16384	Memory add-on 16GB (1x16GB) with qualified DDR4 ECC RAM for EKF boards Core i7 Gen.6+ 0...70°C operating temperature
CY-40-DDR4-ECC-8192	Memory add-on 8GB (1x8GB) with qualified DDR4 ECC RAM for EKF boards Core i7 Gen.6+ 0...70°C operating temperature
CY-42-MSATA-0128-01	mSATA 128GB (6Gb/s) Solid State Drive (SSD), full-size dim. 50.8mm x 29.85mm x 3.75mm Jedec MO300B Innodisk industrial quality with long time availability -40°...+85°C
CY-42-MSATA-0128-02	mSATA 128GB (6Gb/s) Solid State Drive (SSD), full-size dim. 50.8mm x 29.85mm x 3.75mm Jedec MO300B Innodisk industrial quality with long time availab 0° - 70°C
CY-42-MSATA-0256-01	mSATA 256GB (6Gb/s) Solid State Drive (SSD), full-size dim. 50.8mm x 29.85mm x 3.75mm Jedec MO300B Innodisk industrial quality with long time availability 0° - 70°C
CY-70-AC-001	115/230V AC-IN, 180W CompactPCI PSU, M24/8 DIN 41612 connector, 4 voltages, complete device incl. panel and handle, format 3U/12HP.
CY-70-AC-004	100/240V AC-IN, 250W CompactPCI PSU, P47 connector, 4 voltages, complete device incl. panel and handle, format 3U/8HP.
CY-70-DC-001	8.5V - 36V DC-IN, 120W CompactPCI PSU, M24/8 DIN 41612 connector, 4 voltages, complete device incl. panel and handle, format 3U/12HP
CY-70-DC-003	18V - 36V DC-IN, 250W CompactPCI PSU, P47 connector 4 voltages, complete device incl. panel and handle format 3U/8HP
CY-70-DC-004	9V - 30V DC-IN, 500W Industrial PSU, power screws 12VDC only output
CY-70-DG2070	3U/10HP CompactPCI PSU 70W, DC-Input 18V - 36V, Output 3.3V/5V complete Device with 10HP frontpanel, cable retainer Includes 350.9.DG2070.9 + Accessoires.
CY-70-P2071	3U/10HP CompactPCI PSU 70W, AC-Input 115/230V, Output 3.3V/5V inlcuding cable retainer and power cord
CompactPCI * Adapter
CA2-1-FUNK	3U, adapter PCI-to-CPCI (carrier/bridge), 1 PCI slot suitable for PCI Card 57.00mm x 160.00mm, front panel width 8HP
CA2-2-FUNK	3U, adapter PCI-to-CPCI (carrier/bridge), 3 PCI slots suitable for PCI Short Cards, front panel width 4HP (open frame mounting of the PCI Cards)
CA2-3-FUNK	3U, adapter PCI-to-CPCI (carrier/bridge), 3 PCI slots suitable for PCI Short Cards, front panel width 28HP (completely covering the PCI Cards)
CA2-4-FUNK	6U, adapter PCI-to-CPCI (carrier/bridge), 1 PCI slot suitable for PCI Card 107.00mm x 160.00mm ( > 160,00mm depends on system properties) front panel width 8HP
CompactPCI * CAN Fieldbus
CX2-1-GROUP	3U, dual CAN 2.0A/B hostadapter, 1 x CAN controller SJA1000, optically isolated, incl. driver for Windows/Linux
CX2-2-GROUP	3U/4HP, dual CAN 2.0A/B hostadapter, 2 x CAN controller SJA1000, optically isolated, incl. driver for Windows/Linux
CX2-3-GROUP	Treiber/API fuer CX2-GROUP QNX 4.x und 6.x
CompactPCI * CPU Mezzanine
C32-1-FIO	Add-on mezzanine module with mixed front panel I/O, 2 x COM RS-232, 2 x USB, PS/2 keyboard/mouse, suitable for CCO-CONCERT (12HP assembly stack)
C32-2-FIO	Similar to C32-1-FIO, with 1USB to use with sideboards have USB (CCO-2/CCO-4 etc.) on mechanically reason.
C32-3-FIO	Sidecard for SZC Board.Changed Power Supply for USB-Por USB Power Supply is corrected in relation to SC4
C32-4-FIO	Sidecard for PCU Board.
C40-1-SCFA	Add-on module, SATA to CompactFlash adapter, for CCM-BOOGIE or similar, stack height 9.5mm
C40-2-SCFA	Add-on module, SATA to CompactFlash adapter, 2x SATA 1x USB ports onboard for CCM-BOOGIE or similar
C40-P2-SCFA	Add-on module, SATA to CompactFlash adapter, 2x SATA 1x USB ports onboard for CCM-BOOGIE or similar
C41-1-CFAST	Add-on mezzanine module, CFast SSD card adapter, stack height 9mm for CCM-BOOGIE, PC1-GROOVE or similar
C41-P1-CFAST	Add-on mezzanine module, CFast SSD card adapter, stack height 9mm for CCM-BOOGIE, PC1-GROOVE or similar
C43-1-SATA	Add-on module, 3 internal SATA, 2 internal USB, for CCM-BOOGIE/PC2-LIMBO, stack height 9.5mm. No USB Flash option.
C43-P1-SATA	Add-on module, 3 internal SATA, 2 internal USB, for CCM-BOOGIE/PC2-LIMBO, stack height 9.5mm. No USB Flash option.
C44-1-SATA	3U/4HP Mezzanine expansion board for CCM-BOOGIE and successor CPU cards, side board with 2.5-inch SATA SSD or HDD option, front panel I/O 2 x eSATA (RAID) and 3 x USB
C44-P1-SATA	3U/4HP Mezzanine expansion board for CCM-BOOGIE and successor CPU cards, side board with 2.5-inch SATA SSD or HDD option, front panel I/O 2 x eSATA (RAID) and 3 x USB
C45-1-SATA	3U/4HP Mezzanine expansion board for CCM-BOOGIE and successor CPU cards, side board for 1.8-inch SATA SSD, front panel I/O 2 x eSATA (RAID) and 3 x USB
C45-2-SATA	3U/4HP Mezzanine expansion board for CCM-BOOGIE and successor CPU cards, side board for removable 1.8-inch SATA SSD, front panel I/O 2x USB Version 2012: with metal holder at the front.
C47-1-MSATA	Add-on module, dual MSATA SSD sockets, additional USB connector, additional SATA connector, for CCM-BOOGIE, PC1-GROOVE, PC2-LIMBO, or similar
C47-2-MSATA	Add-on module (low profile), dual MSATA SSD sockets, for current EKF CPU Boards
C47-P2-MSATA	Add-on module (low profile), dual MSATA SSD sockets, for current EKF CPU Boards
C48-1-M2	Add-on module (low profile), 2 x M.2 SATA SSD sockets, for M.2 2230/2242/2260/2280 SSD modules Suitable for M.2 S1-S3 / D1-D4
C48-9-M2	Add-on module (low profile), 2 x M.2 SATA SSD sockets, for M.2 2230/2242/2260/2280-D5/S3 SSD modules incl. coating!
C48-P1-M2	Add-on module (low profile), 2 x M.2 SATA SSD sockets, for M.2 2230/2242/2260/2280 SSD modules Suitable for M.2 S1-S3 / D1-D4
CCE-1-PUNK	3U/4HP Mezzanine expansion board for CCD-CALYPSO, 2 x 1394a FireWire, 2 x USB2.0, 2 x RS-232, option on-board hard disk
CCE-2-PUNK	Similar to CCE-1-PUNK, w/o IEEE 1394
CCK-1-MARIMBA	3U/4HP Mezzanine expansion board for CCG-RUMBA and CCM-BOOGIE, side board with PMC/XMC module socket CompactFlash socket, opt. C20-2-SATA
CCL-1-CAPELLA	3U/4HP Mezzanine expansion board for CCG-RUMBA and CCM-BOOGIE, side board with 4 x GB-Ethernet option onboard SATA drive with C20
CCL-2-CAPELLA	3U/4HP Mezzanine expansion board for CCG-RUMBA and CCM-BOOGIE, side board with 4 x GB-Ethernet IEEE 1394, option onboard SATA drive with C20, CompactFlash with C10, 2 external SATA interface.
CCL-P1-CAPELLA	3U/4HP Mezzanine expansion board for CCG-RUMBA and CCM-BOOGIE, side board with 4 x GB-Ethernet option onboard SATA drive with C20
CCO-4-CONCERT	3U/4HP Mezzanine expansion board for CCM/PC1/2/3/SC1 front panel I/O includes USB, audio (line-In -Line Out), 2x COM Port, on-board SATA port for 2.5" device
CCO-5-CONCERT	3U/8HP Mezzanine expansion board for CCM,PC1/2 front panel I/O includes USB, audio (line-In -Line Out), 2x COM Port, up to 2x SATA drive 2.5" via C20 carrier
CCO-6-CONCERT	3U/4HP Mezzanine expansion board for CCM-BOOGIE front panel I/O includes audio (line-In -Line Out) DVI-D, on-board 2.5-inch SATA connector, 1* COM Port
CCO-P4-CONCERT	3U/4HP Mezzanine expansion board for CCM/PC1/2/3/SC1 front panel I/O includes USB, audio (line-In -Line Out), 2x COM Port, on-board SATA port for 2.5" device
CCO-P5-CONCERT	3U/8HP Mezzanine expansion board for CCM,PC1/2 front panel I/O includes USB, audio (line-In -Line Out), 2x COM Port, up to 2x SATA drive 2.5" via C20 carrier
CCO-P6-CONCERT	3U/4HP Mezzanine expansion board for CCM-BOOGIE front panel I/O includes audio (line-In -Line Out) DVI-D, on-board 2.5-inch SATA connector, 1* COM Port
CompactPCI * CPU Rear I/O
CCT-1-RIO	3U/4HP Rear I/O transition module for CCD-CALYPSO - CCG-RUMBA - CCM-BOOGIE, 2 x SATA, 1 x ESATA, 2 x USB, GB-Ethernet, VGA video, RS-232
CompactPCI * ExpressCard
CP5-11-GLAM	3U, new technologies carrier board: two PCI Express MiniCard sockets incl. SIM/UIM card holders, 6 x SMA antenna connectors for MIMO WiFi/GSM/WiMax
CP5-P11	3U, new technologies carrier board: two PCI Express MiniCard sockets incl. SIM/UIM card holders, 6 x SMA antenna connectors for MIMO WiFi/GSM/WiMax
CompactPCI * Network Switching
CL1-05-COMBO	Gigabit Ethernet switch, 5 x RJ45 front panel jacks, P2: +5V 5 1/4 inch Hard Disk style connector for power supply.
CL1-06-COMBO	Gigabit Ethernet switch, 5 x RJ45 front panel jacks, CPCI J1 Connector for +5V power supply only.
CL2-05X-BRASS	Gigabit Ethernet switch, 5 x M12 (8-lead X-coded) F/P receptacles, +5V via 4 pin onboard power connector (P2), temperature range -25°C to +85°C conform EN 50155/T3
CL2-06X-BRASS	Gigabit Ethernet switch, 5 x M12 (8-lead X-coded) F/P receptacles, +5V only via J1 CPCI backplane connector, temperature range -25°C to +85°C
CompactPCI * Networking
CN6-2-ECHO	3U, Dual 1000BASE-T Gigabit Ethernet NIC, 2 x RJ45 10/100/1000Mbps, 32-bit J1 (J2 removed), 33/66MHz CPCI
CN6-P2	3U, Dual 1000BASE-T Gigabit Ethernet NIC, 2 x RJ45 10/100/1000Mbps, 32-bit J1 (J2 removed), 33/66MHz CPCI
CN7-P5	5-Port Gigabit Ethernet controller, 5 x RJ45 front panel connectors
CN8-0500-REVERB	5-Port Gigabit Ethernet controller, 5 x RJ45 front panel connectors
CompactPCI * PMC/XMC Carrier
CK2-1-SESSION	XMC module carrier board, 32-bit 33/66MHz PCI to PCI Express bridge, XMC connector J15, PCI Express 2.5Gbps single lane
CompactPCI * System Rack
CR1-3-RACK	1U 19-inch rack, 3+1 slots for 3U CompactPCI cards, rear I/O, PSU 250W 90-264V 50/60Hz (+5/+3.3/+12/-12V), 1 x system slot 3U 4HP/8HP, 2 x peripheral slots 3U/4HP seven 4HP blind panels and power cable included
CR4-15-RACK	19" System rack 4U/84HP PlusIO cPCI System 3 cPCI, 1x PlusIO, 4x cPCI-S.0, 250W PSU AC 1 U hot-swap fan unit.
CR4-2-RACK	19" System rack 4U, 8-slot CompactPCI backplane 3U P1-P2, industrial ATX power supply, 1U fan unit, depth 280mm, suitable for 3U CompactPCI boards
CR4-4-RACK	Similar to CR4-2-RACK, but Rear I/O backplane
CR9-5-ADAPT	front panel expansion adapter for 3U board mounting in 6U racks, suitable for all EKF 3U (4HP) boards,
CR9-6-ADAPT	same as CR9-5, but double width (8HP)
CRB-1-BLUELINE	BLUELINE 3U/30HP small system rack, w h d ~ 172mm x 132mm x 208mm, incl. tip up feets CPCI PSU 70W 115/230VAC(3.3V,5V) CPCI backplane 4 x P1, suitable for 3U CompactPCI boards
CRB-4-BLUELINE	BLUELINE 3U/30HP small system rack incl. fan unit, w h d ~ 172mm x 166mm x 208mm, CPCI PSU 70W 115/230VAC (3.3V,5V), CPCI 4 x P1, suitable for 3U CompactPCI boards
CRB-5-BLUELINE	Similar to CRB-4-BLUELINE, 24VDC power line input
CRB-8-BLUELINE	Bottom mount brackets
CompactPCI * UART
CUD-01-TWIST	Serial interface 4 x isolated RS-485 half/full-duplex, 4 x RJ45 front panel connectors, pinout suitable for CU4 replacement. Please refer to ekf.com -> CUD-TWIST PIE: Alternate 2
CUD-02-TWIST	Serial interface 4 x isolated RS-485 half/full-duplex, 4 x RJ45 front panel connectors, pinout suitable for CU4 replacement, additional 4 Ports via J2, CU9 and (CU7 or CU8).
CUE-01-BALLAD	Serial interface 4 x isolated RS-232, 4 x RJ45 front panel connectors, pinout suitable for CU4 replacement.
CUE-02-BALLAD	Serial interface 4 x isolated RS-232, 4 x RJ45 front panel connectors, pinout suitable for CU4 replacement, additional 4 Ports via J2, CU9 and (CU7 or CU8).
CompactPCI * USB 3.0
CB3-1-TONE	Quad port USB 3.0 controller
CB3-97-TONE	Quad port USB 3.0 controller incl. conformal coating
CB3-P1	Quad port USB 3.0 controller
CompactPCI * Video/Graphics
CV2-1-LOUNGE	Dual display graphics processor, up to 1920x1440, dual-view independent outputs, 32 bit per pixel 2 x DVI-I (18 bit per pixel) video output connectors 5V supply voltage only
CV2-2-LOUNGE	Dual display graphics processor, up to 1920x1440, dual-view independent outputs, 32 bit per pixel 2 x VGA video output connectors 5V supply voltage only
CV2-3-LOUNGE	Dual display graphics processor, up to 1920x1440, dual-view independent outputs, 32 bit per pixel 1 x DVI-I connector, 1 x VGA connector 5V supply voltage only
CVX-0100-DVI	Dual DisplayPort to DVI adapter, 2 x mDP inputs, 2x DVI outputs, selectable DVI-D or DVI-A (VGA)
CVX-0200-DVI	Dual DisplayPort to DVI adapter, 2 x mDP inputs, 2x DVI outputs, selectable DVI-D or DVI-A (VGA) 1x VGA output via J2