SC1-ALLEGRO
CompactPCI® Serial CPU Card
Powerful Intel® Core™ i7 (Ivy Bridge) Mobile Processor
Quad-Core and Dual-Core Versions • Up to 16GB DDR3 ECC Memory
The SC1-ALLEGRO is a rich featured high performance 4HP/3U CompactPCI® Serial
CPU board, equipped with an Intel® Core™ i7 Ivy Bridge + ECC
(dual- or quad-core) mobile processor based on
22nm technology. The SC1-ALLEGRO front panel is provided with two Gigabit
Ethernet jacks, two USB 3.0 receptacles, and two Mini-DisplayPort connectors
for attachment of high resolution digital displays, configured e.g. as
extended desktop.
|
|
The SC1-ALLEGRO is equipped with up to 16GB RAM with ECC support.
8GB memory-down are provided for rugged applications, and another
8GB are available via the DDR3 ECC SO-DIMM socket. As an option,
a low profile mezzanine module with dual mSATA SSDs may serve as
a high-speed RAID mass storage solution. The SC1-ALLEGRO backplane
connectors comply with the PICMG® CompactPCI® Serial system slot
specification.
|
|
SC1-ALLEGRO • Intel® Core™ i7 (Ivy Bridge) Mobile Processor
|
The SC1-ALLEGRO is equipped with a set of local expansion interface connectors,
which can be optionally used to attach a mezzanine side board. A variety of
expansion cards is available, e.g. providing legacy I/O and additional PCI Express®
based I/O controllers such as SATA, USB 3.0 and Gigabit Ethernet, or a third video
output. Most mezzanine side cards can accommodate in addition a 2.5-inch drive.
|
|
Typically, the SC1-ALLEGRO and the related side card would come as a readily
assembled 8HP unit. As an alternate, low profile Flash based mezzanine storage
modules are available that fit on the SC1-ALLEGRO while maintaining the 4HP profile.
The C42-SATA module e.g. is equipped with a very fast 1.8-inch SATA Solid State Drive (SSD),
which is suitable for installation of any popular operating system.
|
|
Feature Summary
|
- CompactPCI® Serial (PICMG® CPCI-S.0) System Slot Controller
- Based on the Intel® Chief River Platform (Ivy Bridge + ECC CPU, Panther Point PCH)
- Intel® Core™ i7 Mobile + ECC Processor, 22nm Process Technology, Low Power, Quad-Core & Dual-Core
- i7-3612QE Processor 2.1GHz • 35W TDP Standard Voltage Quad-Core
- i7-3555LE Processor 2.5GHz • 25W TDP Low Voltage Dual-Core
- i7-3517UE Processor 1.7GHz • 17W TDP Ultra Low Voltage Dual-Core
- i5-3610ME Processor 2.7GHz • 35W TDP Standard Voltage Dual-Core
- i3-3120ME Processor 2.4GHz • 35W TDP Standard Voltage Dual-Core
- i3-3217UE Processor 1.6GHz • 17W TDP Ultra Low Voltage Dual-Core
- Celeron® 1047UE Processor 1.4GHz • 17W TDP Ultra Low Voltage Dual-Core
- Integrated HD Graphics Engine, 3 Independent Displays, Enhanced Media Processing
- Integrated Memory Controller up to 16GB DDR3 +ECC 1600
- DDR3 +ECC Soldered Memory up to 8GB
- DDR3 +ECC SO-DIMM Memory Module Socket up to 8GB
- Performance Rating Passmark 8.0 SC1-680D (i7-i7-3612QE): Passmark Rating 2241, CPU Rating 7243
- Intel® QM77 Panther Point Platform Controller Hub (PCH)
- Up to 3 Display Configuration (Front Panel: Dual mDP or Single VGA Connector Option)
- Max Resolution 2560 x 1600 (DisplayPort), 1920 x 1200 (VGA)
- 2 + 1 SATA Channels 6Gbps/3Gbps for Mezzanine Storage Modules (Connector HSE)
- CompactFlash® Card with C40-SCFA Mezzanine Module Option (4HP Maintained)
- CFast™ Card with C41-CFAST Mezzanine Module Option (4HP Profile Maintained)
- SATA 1.8-Inch Solid State Drive with C42-SATA Mezzanine Card Option (4HP Maintained)
- Dual mSATA Modules with C47-MSATA RAID Mezzanine Card Option (4HP Maintained)
- Dual M.2 SATA Modules with C48-M2 RAID Mezzanine Card Option (4HP Maintained)
- 7 x SATA Channels 3Gbps to Backplane Connectors, 5 Channels Available for Hardware
RAID Configuration Level 0/1/10 + Hot Spare (Option RAID Level 3/5)
- 4 x USB 3.0 XHCI SuperSpeed Channels (2 x to F/P Connectors, 2 x Backplane)
- 10 x USB 2.0 EHCI (6 x to Mezzanine Connectors, 4 x Backplane)
- 4 x Gigabit Ethernet Controllers (2 x F/P RJ-45 Jacks and 2 x Backplane Connector)
- 8 + 8 x PCI Express® Gen3 Lanes to CPCI Serial Backplane (CPCI Serial Fat Pipe 1 + 2)
- 4 + 4 x PCI Express® Gen2 Lanes (4 x Mezzanine Connector, 4 x Backplane)
- Legacy I/O Mezzanine Expansion Connector EXP (USB, HD Audio, LPC)
- High Speed I/O Mezzanine Expansion Connector HSE (4 x SATA, 4 x USB)
- PCI Express® Mezzanine Expansion Connector PCIE (4 Lanes)
- Third Display Mezzanine Expansion Connector SDVO/DP
- Variety of Mezzanine Expansion Boards (Side Cards) Available with and w/o PCIe
- Most Mezzanines Optionally Equipped with 2.5-Inch Single- or Dual-Drive
- Phoenix® UEFI (Unified Extensible Firmware Interface) with CSM (Compatibility Support Module)
- Long Term Availability
- Coating, Sealing, Underfilling on Request
- RoHS compliant
- MTBF 104 x 103h (11.9 years) @ 40°C
- Designed & Manufactured in Germany
- ISO 9001 Certified Quality Management System
- RT OS BSP & Driver Support - VxWorks 7.0 Available, QNX and Others on Request
|
|
SC1-ALLEGRO • CompactPCI® Serial System Slot Controller
|
While mechanically compliant to CompactPCI® Classic, CompactPCI® Serial
(PICMG® CPCIS.0) defines a completely new card slot, based on PCI Express®,
SATA, Gigabit Ethernet and USB serial data lines. Up to 6 high-speed
backplane connectors P1 - P6 are provided on a system slot controller
such as the SC1-ALLEGRO, which can be considered as a root hub with
respect to most signal lines. A passive backplane is used for distribution
of a defined subset of I/O channels from the system slot to each of up
to eight peripheral slots in a CompactPCI® Serial system.
|
|
Most CompactPCI® Serial peripheral slot cards require only the backplane
connector P1, which comprises PCIe, SATA and USB signals, resulting in a
concise and inexpensive peripheral board design. More powerful peripheral
cards profit from so called Fat Pipe slots (PCIe x 8).
The SC1-ALLEGRO is a native CompactPCI® Serial CPU card, suitable for
usage in a pure CPCI Serial environment. Due to its generous backplane
capabilities (20 x PCI Express® lanes, 6 x USB, 7 x SATA, 2 x GbE),
very powerful industrial systems can be built.
|
|
SC1-ALLEGRO • Simplified Block Diagram
|
|
SC1-ALLEGRO • Miscellaneous SATA Based Mezzanine Storage Modules Available
|
|
SC1-ALLEGRO with SCS-TRUMPET Side Board (8HP Assembly)
|
|
|
Ordering Information |
Please refer to
List 21
for popular SC1-ALLEGRO SKUs
For popular mezzanine side cards please refer to
List 20
|
|
